20 gigs found in Scotland

We have a number of scholarships available for new self-funded, international (non-EU) fee paying students with excellent academic qualifications. The scholarships are available if you've applied for a relevant course. You must also start your studies from January 2020 for the MSc in Civil Engineering with Industry programme, or during the 2019-2020 academic year for your postgraduate research studies.  Value:  Up to £4,000 Opens:  1 September 2019 Deadline:  17 January 2020 Help with:  Tuition fees Duration:  One year Eligibility The scholarship is available for application to all self-funded, new international (non-EU) fee paying students holding an offer of study for the MSc in Civil Engineering with Industry, or for a postgraduate research programme.  You must start your full-time MSc in January 2020 or postgraduate research programme at Strathclyde this academic year (2019-2020).  Postgraduate Taught You'll need a minimum of a 2:1 (or equivalent) in your undergraduate degree to be considered. Important things to note The application process is now open. Completed application forms should be submitted as early as possible. You can only apply for a scholarship once you've applied for a place on a full-time course through the University of Strathclyde’s admission process and have been offered either a conditional or unconditional place. The Faculty of Engineering Excellence Scholarship is only eligible for new self-funded, international (non-EU) fee-paying students enrolling on a full-time course.  Please note that students who receive full sponsorship from a government office or embassy are not eligible to apply for this scholarship. Students are only eligible for one scholarship per academic year from the University of Strathclyde. Students who do not meet any of the required criteria in this announcement will automatically not be considered. The Faculty of Engineering's decision on the awarding of scholarships is final. Further Information Key details Postgraduate Taught Postgraduate Taught MSc in Civil Engineering with Industry applicants will receive up to £3,000 towards course tuition fees. Postgraduate Research A number of scholarships of up to £4,000 towards course tuition fees for the first year of a full-time PhD are available. Eligible postgraduate research students will receive a further £1,500 scholarship for each subsequent year of study. Contact us For more information just send us an email to:  eng-scholarships@strath.ac.uk

To recognise academic excellence, The Faculty of Engineering at the University of Strathclyde is offering a number of scholarships to RUK students who are paying a tuition fee of £9,250 per year and achieve AAB or above at A Level (or equivalent) will receive £1,000 for their first year at Strathclyde. Number of scholarships:  a number of scholarships will be offered Value:  £1000 Opens:  1 October 2019 Deadline:  11 September 2020 Help with:  Equipment and study costs Eligibility The scholarship is awarded to new undergraduate students who enter the University in the 2020/21 academic year and achieve AAB or above at A Level (or equivalent) Pay a tuition fee of £9,250 per year Further Information Eligible students will be identified automatically through their University application Before the end of September 2020 eligible students will receive an email to their University of Strathclyde email address telling them they will receive the award The email will include the payment dates and how it will be paid to you The Faculty of Engineering RUK Undergraduate Excellence Scholarship is for the first year of study only Students are still eligible to receive the other available RUK funding, including; Strathclyde Access Bursary 2020/21, Strathclyde Excellence Scholarship, Accommodation Bursary   Contact us For further information on this scholarship, please contact:  eng-scholarships@strath.ac.uk

The DMEM Excellence Scholarship is open to well-qualified overseas students joining a one year MSc in the Department of Design, Manufacturing & Engineering Management. Number of scholarships:  Number varies every year. Value:  Up to £1,500 towards tuition fees. Opens:  1 October 2019 Deadline:  31 August 2020 Help with:  Tuition fees Duration:  1 year Eligibility The DMEM Excellence Scholarship is open to well-qualified overseas students joining a one year MSc in the Department of Design, Manufacturing & Engineering Management. Candidates must register for the programme pior to any awards being allocated. Contact us eng-scholarships@strath.ac.uk   Eligibility summary Country Group: International Subject:  Design manufacture and engineering management Level of Study:  Undergraduate Mode of Study:  Full Time

 Conduct research in Digital Rock Physics project Excellent understanding of pore scale physics Develop new physics and numerical models in Total’s in-house pore scale simulators Perform validation studies on the developed software Initiate studies / analyses to resolve technical issues Develop, and enhance contacts with Company staff in France and elsewhere, for the execution of projects. Develop, maintain and enhance professional and academic contacts outside the Company Monitor technical aspects of contracted research that fall within speciality. Integrate new models developed by academic partners into internal codes. Publish and report research results internally and externally both in written form in technical reports and professional journals and as presentations at internal and external professional and academic conferences and seminars. Produce all work to high quality and on time whilst accepting individual responsibility for the activities. Contribute actively to the exchange of ideas and knowledge within a research multi-disciplinary environment. Provide mentorship, guidance and support to intern students undertaking research projects as part of post-graduate degree courses.  Context and environment There are significant worldwide growth opportunities for the Company, which are more and more technically and commercially challenging.  The Company needs a first class Research function to ensure that it remains at the forefront of emerging technology, pursues opportunities on the basis of sound economic, technical and risk evaluations and is increasingly recognised as a ‘Partner of Choice’ by Governments, National Oil Cos and other Operating Oil Cos. The Research reservoir engineer has an important role to play in the development of new reservoir engineering techniques within the Company. Candidate profile   Preferably PhD in pore scale simulation or MSc with relevant experience Strong coding skills (C++ or Fortran) Knowledge of parallel programming (MPI, OpenMP) Excellent understanding of pore scale physics Knowledge of image segmentation and processing is desired Knowledge and expertise in areas relavant to our research requirements such as pore network modelling, computational fluid dynamics, and numerical analysis Presentation and report-writing skills Communication skills

A vacancy will shortly arise for a Machine Operator within our Production Department on 5-crew at Irvine Business Unit.  Main responsibilities of the role include:   Safe operation of I.S. Machines Identification of container defects Swabbing Procedures Health & Safety and Hygiene Awareness  The ideal candidate will have:   Production and/or engineering experience. Capable of working with minimum supervision and on their own initiative and as part of a team. Enthusiasm, commitment & personal drive.  What we offer as a company:   Competitive salary. Defined Contribution Pension Scheme. Career progression opportunities.  The successful applicant should be prepared to undergo an initial period of training (5 days) at one of our Yorkshire plants.   Requirements:   Educated to GSCEs grade C or above in Maths, Science and English (or equivalent). Production and/or engineering experience in a continuous process industry. Attention to detail and ability to solve problems. Awareness of relevant Health & Safety and Hygiene Regulations. Computer literate. Good oral & written communication skills.  Please note, as part of the recruitment process, applicants for this position will be required to participate in a series of aptitude tests.

Lonza is one of the world’s leading and most-trusted suppliers to the pharmaceutical, biotech and specialty ingredients markets. Lonza harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life. An integrated solutions provider serving the healthcare continuum, Lonza offers products and services from the custom development and manufacturing of active pharmaceutical ingredients to innovative dosage forms for the pharma and consumer health and nutrition industries. In addition to drinking water sanitizers, nutraceuticals, antidandruff agents and other personal care ingredients, the company provides agricultural products, advanced coatings and composites and microbial control solutions that combat dangerous viruses, bacteria and other pathogens. Founded in 1897 in the Swiss Alps, Lonza today is a well-respected global company with more than 50 major manufacturing and R&D facilities and nearly 14,000 full-time employees worldwide. Since its foundation in 1989, the Livingston site has evolved into a global player in the development and application of both traditional and novel drug encapsulation technologies that are supported by modern and commercial scale manufacturing facilities.     Our Mission: To be the world’s leading, integrated solutions provider for it’s pharma and consumer healthcare and nutrition customers all along the heathcare continuum. This role reports to the Production Team Leader and will involve general production related duties. The job holder will be a flexible individual with the ability to communicate well with others. The ideal candidate will have previous work experience within a manufacturing environment.  Job purpose : To carry out production tasks, be involved in minor maintenance tasks and provide support for other areas of the business that fall within the scope of the individual’s skills and knowledge when required  Key responsibilities and accountabilities: Prepare, operate and clean down equipment Maintain cleanliness and tidiness of the production area Carry out minor equipment maintenance tasks when required Prepare and transfer raw material to production area when required Process information/ input data using appropriate systems (paper and computer based) Provide support for other areas of the business when required Follow Company safety policies, systems of work, procedures, signage and guidelines Attend training and to develop skill and knowledge Adhere to cGMP guidelines and principles  Person profile – Production Operator Personality: Motivated individual with a positive outlook, and a clear focus on delivering a quality product. Can critically assess own performance and contribute to determining own development needs.  Good communicator who is comfortable dealing and communicating with all people of all levels. Reliable, tolerant, and determined.   Able to get on with others and be a team player, but is equally comfortable working independently and unsupervised. Personal Situation:       Able to work extended hours on occasions when required.                     Shift Work is a requirement of the role       Specific Job Skills: Desired: Experience of working within a cGMP environment Blister packing experience is considered an advantage Mechanical skills will also be considered an advantage Required: Direct experience within a regulated production environment GMP machine operator 3+ years A good understanding cGMP and can apply the principles Able to communicate well and in a timely manner with all levels Understands and demonstrates the principles H&S in a Production environment Appreciates need for consistency  Computer skills: Must have basic skills Literacy and Numeracy: Able to record information legibly, accurately and in compliance with cGMP standards in a concise and unambiguous manner Business Skills : Must understand the need for keeping production process flowing with due regard to regulatory and quality constraints  Benefits Package: The benefits package will include; Private Medical Insurance Health Cash Plan Contributory Pension Scheme Life Insurance

Are you looking to join an exciting start-up organization that has developed a groundbreaking, patent-pending proprietary technology? Low Emissions Resources Corp (LERC) technology uses ionically-conducting ceramic materials that creates clean, cost-effective synthesis and transformation of a variety of essential chemicals and compounds. Our energy-efficient Solid-Oxide Electrolyzer Cell System (SOEC) has many applications in making useful chemicals. Our Dundee facility houses our Research & Development and Process & Design teams which also take advantage of our formal collaboration agreement St. Andrews University, allowing for robust collaboration with faculty, students and post-docs. We are looking to add a Laboratory Technician to our growing research staff. The Laboratory Technician will assist our engineers, scientists and the Senior Laboratory Technician in day-to-day lab operations involving research and process design. They perform routine technical tasks, including operating and maintaining equipment, as well as conducting analysis and implementing experimental procedure. Responsibilities/Duties/Functions/Tasks Demonstrates proper laboratory safety techniques. Effectively communicates both verbally and in writing. Ability to operate computer using various software packages. Ability to safely operate scientific equipment instrumentation. Ability to operate microscopes, ovens, extrusion equipment. Requirements Team Standards We are proud of how our team works together. We expect all of our staff to: Perform quality work within deadlines with or without direct supervision. Interact professionally with other employees, customers and suppliers. Work effectively as a team contributor on all assignments. Work independently while understanding the necessity for communicating and coordinating work efforts with other staff and organizations. Qualifications A minimum of one year experience in a chemistry lab or the equivalent experience utilizing chemistry equipment. Working knowledge of material science and chemistry. Knowledge of chemical and physical hazards and their control. Must be very organized and to prioritize and expedite based on needs. Special Position Requirements Local travel required between sites. Must have reliable transportation. Position may use solvent chemistry and must be able to pass respirator training. Preferences Bachelor’s Degree Prior experience working in industry Work Requirements Must have the ability to legally work in the United Kingdom. Environment will be hectic and will require constant clean up and maintenance Benefits Compensation for this position is competitive based upon experience.  Low Emissions Resources Global is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We operate in a manner compliant with GDPR.

IHS Markit - Energy – the industry’s authoritative provider of analytics, insight and solutions, helping organizations understand the interconnected, dynamic forces that shape energy markets. Our experts and analytical tools help clients continuously improve their strategy and operations across the entire energy value chain. IHS Markit Energy operates on the principles of mutual advantage and building long-term, sustainable relationships. We have a global network with local presence in every key energy market. IHS Markit Energy data, software, insights and advisory services encompass the complete energy value chain, providing roadmaps and mileposts into the energy futures across all regions and fuel types for: executives, planners, commercial and financial analysts, asset teams and government agencies. The Data Transformation Analyst is responsible for sourcing and transforming raw data into critical information. They are responsible for identification, matching, validating and creating relationships between operator-submitted drilling and completions records with IHS Markit and public sourced data.  What will you be doing? Establish, cultivate and maintain cooperative relationships with oil and gas contacts to validate drilling and completion information on a regular basis Timely and efficiently relay and/or communicate resolution to customers within specified timelines Replicate customer issues to address problems and submit to IHS Markit Development partners as needed Create, update and suggest customer service processes documentation for internal and external use Handle technical or information queries from internal and external customers Provide insight on content or data and/or provide technical support to customers Resolve general customer inquiries via email or telephone Perform additional duties or special projects as identified  About you Industry experience or University degree (Bachelors or equivalent) in Engineering/Sciences, or related field preferable Typically, 2 year + of industry related experience, with a current knowledge of the Energy sector preferable Knowledge of Energy Sector terms, specifically with Onshore and Offshore Drilling and Completions, for data definitions and data QC preferable Database mapping experience, assisting customers to import data Ability to independently utilize websites and industry publications for relevant information Ability to make sound decisions related to the validity of information and sources Proficient in the use of internal systems applications Proficient in use of MS Office applications, particularly Excel Strong attention to detail and organisation skills Excellent communication skills, including professional telephone etiquette and written and verbal fluency in English Ability to work independently and as part of a multi-cultural team Strong reading, writing and analytical skills  IHS Markit is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities. If you are interested in applying for employment with IHS Markit and need special assistance or accommodation to use our website to apply to a position, please contact  accessibility@ihsmarkit.com  or call +1 212 849 0399. Determination on requests for reasonable accommodation will be considered on a case-by-case basis. This contact information (email and phone) is intended for application assistance and accommodation requests only.    We are unable to accept resumes or provide information about application status through the phone number or email address above. Resumes are only accepted through the online application process and only qualified candidates will receive consideration and follow-up.  IHS Markit is proud to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by law. We maintain a drug-free workplace and perform pre-employment drug testing. As a federal contractor in the United States, IHS Markit is required to participate in the E-Verify Program to confirm eligibility to work in the United States.

Q2 Solutions is a leading clinical trial laboratory services organization with end-to-end laboratory services and secure, enterprise-wide biospecimen and consent management solutions. With a relentless focus on quality and innovation, Q2 Solutions uses its global experience and scientific expertise to transform science and data into actionable medical insights that help customers improve human health.  A joint venture of IQVIA (formerly QuintilesIMS) and Quest Diagnostics, Q2 Solutions combines the best of each parent organization’s clinical trials laboratory services capabilities to fulfill its mission of treating each sample as if a life depends on it. Coordinate operations and provide support to the records or imaging center.  Provide reference services to all departments and personnel and distribute incoming information for integration into systems.   Responsibilities Ensure effective security, storage, and retrieval of all proprietary and client information in accordance with established procedures.  Includes usage of scanning equipment. Conduct imaging/scanning processes and train imaging/scanning processes Provide reference services to internal clients in accordance to SOPs and by maintaining accurate charge-out systems. Sort and classify coded material for filing.  Create files according to established classification system. Maintain log and enter metadata in database to track status and facilitate accurate retrieval of information. Coordinate work flow through assignment of tasks and establishment of procedures. File, maintain and process reports, collections, and validations where applicable. Maintain logs and indexes to provide status of information and assist in the collection of data for preparation of monthly metric reports. Assist in the training of new team members   on departmental procedures. MINIMUM REQUIRED EDUCATION AND EXPERIENCE Typically does not require prior experience. Requires limited job knowledge of systems and procedures. Follows basic work routines and standards.

Wood is currently recruiting for a Mechanical Maintenance Technician to join the core team on TAQA Harding, 2/3 rotation. The successful candidate will support the day-to-day running of the platform by safely performing mechanical maintenance tasks on platform utility and production equipment.  With respect to the maintenance group, this role is accountable for maintaining a positive safety culture ensuring that all tasks are carried out within the law and company policies & procedures.  Primary Accountabilities: Maintenance of mechanical equipment including pumps, compressors, turbines, valves, gearboxes, pipe work, tanks, pressure vessels, hydraulic systems and associated support frames. Installation and maintenance of certified mechanical equipment in hazardous areas. Inspection of relevant devices including rotating equipment, valves, pipe work & flanges. Suggest changes to mechanical equipment to improve plant safety, efficiency and reliability. Execute work to Premier standards including bolt torquing and tensioning. Conduct isolations (spading/de-spading) to conform to Safe System of Work. Tidiness and cleanliness of worksite conditions. Mentor Apprentices in conjunction with  Supervisors. In conjunction with your supervisor progress and complete training plans as identified by your annual appraisal and competency matrix. Minimise wastage in all areas of work e.g.  un-used materials returned to stock. Business & Industry Experience: Experience Offshore Platform equipment or similar Understanding of Platform safety procedures and culture – ability to work within these Skills / Qualifications Time served in recognised trade apprenticeship / S/NVQ

This is one of two fixed-term (36 months) positions hosted by pureLiFi under the ENLIGHT’EM (European Training Network in Low-Energy Visible Light IoT Systems) H2020-MSCA-ITN-2018 programme (https://enlightem.eu).  The Researcher is also expected to pursue a fully funded Doctorate (PhD) programme hosted at the University of Edinburgh’s Engineering department during the programme. The programme focuses on the design of IoT systems that leverage the low baseline energy consumption of LEDs to jointly deliver lighting and networked communication. ENLIGHT’EM will explore the emerging field of low-energy VLC systems for the IoT to design and demonstrate sustainable networking solutions. This role will focus on the design and development of a novel transmitter and receiver architecture that significantly reduces transmitter power loss to no detriment of the spectrum efficiency of the existing solutions. A number of prototypes and development cycles will be required to achieve the ideal combination of modulation bandwidth, current capacity, and power efficiency. An improvement of at least one order of magnitude in power efficiency should be targeted. Key Dates: 30-6-2019: Launch 15 PhD positions for 15 Early-Stage Researchers (ESRs)  31-07-2019: Deadline for on-line applications (or as soon as the positions are filled) 01-11-2019: Target starting date for ESR contracts All applications should proceed through the on-line recruitment portal on the https://enlightem.eu website. The core responsibilities include: Review of existing power supply, driver, and receiver architectures (including existing literature). Development of novel driver, amplifier, and potentially receiver, architectures that aim to significantly reduces power loss with no detriment of the spectrum efficiency of the system. Implement prototypes of the developed architectures and characterise performance across modulation bandwidth, current capacity, and power efficiency. Prepare patent filing submissions covering novel IP developed during the course of the programme. Participate in the ENLIGHT’EM network’s training programmes and secondments to partner organisations. Collaborate with other partner organisations of the Network. Ensure pureLiFi’s adherence to the terms of the programme. Applicants need to fully respect three eligibility criteria (to be demonstrated in the CV):  Early-stage researchers (ESR) are those who are, at the time of recruitment, in the first four years (full-time equivalent) of their research careers. This is measured from the date when they obtained the degree which formally entitles them to embark on a doctorate, either in the country in which the degree was obtained or in the country in which the research training is provided, irrespective of whether or not a doctorate was envisaged.  International mobility: ESRs are required to undertake trans-national mobility (i.e., move from one country to another) when taking up the appointment. At the time of recruitment, researchers must not have resided or carried out their main activity (work, studies, etc.) in the country of their hiring organization for more than 12 months in the 3 years immediately prior to their recruitment. For instance, a researcher who has resided in Spain for 15 months in the last three years cannot apply to any of the three PhD positions in Spain, but can apply to the any of the other 12 PhD positions. Compulsory national service and short stays, such as holidays, are not taken into account.  English language proficiency: ESRs must demonstrate proficiency in both written and spoken English. This is mandatory for the ESRs to take full advantage of the training program.

Wood is currently recruiting for Production Technicians,  These are permanent positions based on Dana Western Isles currently on a 3/3 rotation which will be moving to a 2/3 in October.  Applications can be made via the link Skills / Qualifications Monitor and control the flow of hydrocarbons from the reservoir to point of export Monitor and record plant conditions, bringing deviations or malfunctions to the attention of the Production Supervisor Prepare process plant and equipment for maintenance by applying specified isolations/venting etc Prior to start-up of any plant or equipment, inspect and confirm suitability to return to normal service Maintain own work area in a safe, clean and tidy condition Carry out  process system sampling as required Carry out regular inspections of the installation Minimising downtime and contributing to the achievement of production targets Prepare production reports Perform first line maintenance, identifying and reporting faults Carry out mechanical isolations, gas tests and work-site inspections Carry out emergency duties as required by the OIM / Site Manager Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Your role:  you will be responsible for the day to day supervision of GLP operations within a busy department, ensuring the smooth running of all laboratory tasks and supporting the conduct of GLP regulatory studies. Daily tasks will include direct supervision of the laboratory team, scheduling of work, management of documentation workflow, organising staff training & development and ensuring equipment & facilities are maintained to the highest standards. The ability to maintain effective working relationships with the laboratory team, study management, laboratory management and facilities personnel is critical for success in the role. You will also provide direction to employees in accordance with company policies and procedures, working within the laboratory to provide hands-on support, training, guidance and mentorship to the team .  You will ensure resources are used effectively to achieve organisational goals and will mentor and develop staff, supporting their ongoing career development .  You will actively develop and build a collaborative team through regular communication and feedback, both to the group and on an individual basis.  Who you are: BSc or higher qualification in a Biological Science Proven, competent working experience within a scientific laboratory GLP experience also required for this role Must have competent supervisory experience and demonstrate excellence in leadership qualities Strong planning, organisational and communication skills

Do you have a passion for Finance and aspire to a career that is challenging and rewarding? If so, relevant work experience will enhance your educational achievements and help differentiate you from the competition when seeking your first role. We take great pride in recruiting and nurturing Finance talent of the future. Through our hands-on internship program, students will have a unique opportunity to work alongside a high performing, results-driven Finance Integration team that provides support to the wider business driving the company’s growth, profitability and customer retention. Experience you will gain: Our Finance Integration interns will gain meaningful, practical experience across a range of financial reporting and project integration and will learn to demonstrate competency in implementation spend tracking versus plan, forecasting and reporting to Project Management Leaders. You can expect to develop marketable and transferable skills by engaging in or assisting with the following activities: Supporting Monthly and Quarterly Project spend reporting and forecasting processes for multiple projects. Gain experience working with a high performing team in a dynamic, fast paced environment. Collaborate with business partners to understand priorities and develop and deliver insightful analytical reports and dashboards that meet and exceed their requirements. Experience the Practical Process Improvement continuous improvement culture and support process improvement initiatives. Liaise with a range of stakeholders and business leaders. The core objectives of the Finance Integration team are to deliver our commitments to our stakeholders, enable successful project implementation and drive improvements in key processes. The Intern role will be an integral part of the team and will provide an exciting opportunity to experience a real sense of ownership, responsibility and achievement that can be clearly demonstrated on your CV. Who are we looking for: The successful 2019 internship candidate will: Be studying for, or have completed, a degree in a finance or data related discipline (eg: Accounting, Finance, Economics). Have an interest in pursuing a career in Finance or Project Management Have advanced Excel skills. Demonstrate excellent communication and analytical skills with attention to detail and a passion for using data to make informed decisions. Be a self-starter, able to work independently in fast paced environment. Be native (or fluent to native levels) in English. Nice to have: Competency in Access Database tools Understanding of Power BI reporting solutions Other Information: Applicants are responsible for transportation to and from the Thermo Fisher Scientific office in Inchinnan business park, Renfrew The internship is a full time program 37.5 hours per week What we offer: Competitive salary Free car parking On site gym – subsidised Pension Private medical insurance A variety of flexible benefits

The purpose of the role is to benefit the Marketing & Digital directorate through adding further rigour of measurement to our marketing activity. The role will aid the directorate in assessing and optimising performance across all markets & channels, which in turn will inform future plans and drive efficiency. The post will enable VS to progress the Marketing Data Performance roadmap, whilst providing the Consumer Data Insights team with additional resource to meet the increasing requirements from the Marketing directorate.  Qualifications   WHAT YOU MUST HAVE Degree in one of the following, though flexible if applicant can demonstrate analysis skills: Marketing Business Analytics Data Science WHAT WE’D LIKE YOU TO HAVE Microsoft Office – Advanced Excel & PowerPoint Analysis & report building (i.e. Microsoft Power BI, Google Data Studio, Tableau) Data Management and programming languages (i.e. SQL, Python) would be advantageous but not essential

A career with Kerry Taste & Nutrition offers you an opportunity to shape how people across the globe view food and beverage while providing you opportunities to explore and grow as your interests do. With our commitment to a sustainable future, a career with Kerry is something you can feel good about.   About the role   We are looking for a shift analyst as part of a 5 crew system to allow Quality control of all products through our plant.  Key responsibilities   Working in a team structure within a rotating pattern (including weekends) Accurate and timely execution of analytical testing to defined methods (raw material, in process and end product) Effective communication of results to production and quality personnel Accurate and timely reporting of results in the appropriate electronic system Organoleptic assessment of end products Laboratory equipment calibration as per schedule  Qualifications and skills   Essential Requirements   Minimum HND level (in chemistry or related discipline) Minimum 2 years experience in analytical laboratory role with experience in: Chrmatography (ideally HPLC & GC) Spectrphotometry (UV VIS) Atmic Absorption Spectroscopy Wet Chemistry methds including colour change titrations. Maintenance and calibratin of all laboratory equipment to ensure effective operation. Prficient IT knowledge and a high level of computer literacy. Use of SAP and microsoft excel for data input will be expected. Familiarity with the demands of laboratory QC standards and the interface to Quality systems together Excellent attention to detail, ability to meet tight deadlines, flexible   Desirable   Experience of working in a food testing environment

Do you have experience of tendering within an Engineering environment? Are you able to identify parts and service requirements across a range of rotating equipment? If so, we have a unique opportunity to join a global manufacturing and industrial equipment supplier on a temporary basis for an initial period of roughly 3 months. Duties will include: Preparing, coordinating and issuing detailed quotations/technical tenders for equipment, parts and service Liaise with the sales department as well as other operational teams Follow instructions on methods, techniques and/or approaches Attend bid clarification meetings Facilitate order handover to site facility for manufacturing Actively pursue sales targets for pumps, spares and services Progress order bookings and ensure order is managed in a timely fashion Process enquiries and assist in resolving customer concerns Profile description: The successful candidate will have a proven track record in providing excellent technical customer service support and be able to communicate effectively at all levels. You will be commercially focused and candidates with exposure to international business will be looked upon favourably. Immediate start available for the right candidate. Potential for the contract to be extended beyond the initial 3 months. Please note you will receive an automated response advising you that we have received your CV. Morgan Philips Group and is a leading provider of recruitment, contract professionals and talent management solutions worldwide. We are committed to ensuring that all job applicants are treated equally, without discrimination because of gender, sexual orientation, marital or civil partner status, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age.

We’re living proof that premium brands don’t have to be serious. Let others do all the science and molecule stuff – we’re here to transform customers into better versions of themselves, and have a ton of fun doing it. It means looking good and staying positive- every customer you approach will see you as the face of our brand. You’re going to love doing all those makeovers with our best-selling products, and they’ll love you for making them look amazing. Position Summary You will be responsible for delivering an exciting and unique service to all current and potential customers. In order to maximise sales opportunities you will be confident in making connections with customers, carrying out facial waxing and eyebrow styling, and be determined to win repeat business through rebooking treatments. Duties Include  Sales Goals- Achieving individual sales goals agreed with the counter manager through, making connections with customers, carrying out brow treatments, facial waxing, and booking repeat appointments Teamwork- Everyone is expected to help all team members to ensure all the counter and business needs are met Promotions and Special Events- Supporting both in store and external events through linkups, interdepartmental events and counter events including new product releases and charity events Administration- An individual daily and weekly worksheet will be completed, and where necessary you will assist with counter manager administration. Hygiene and Housekeeping- You will ensure the counter and displays are kept clean and hygienic at all times.  Team members will be required to work weekends, late nights and bank holidays. Brow experts must have a waxing qualification. Benefit is filled with both laughter and hard work - making us a unique place to hang your hat. We offer beauty-full opportunities for growth and development and represent a wide variety of skills and backgrounds. If you're the type of person who puts the word 'no' before the word 'problem,' then we may have a fabulous opportunity for you.

We have an exciting opportunity for a Laboratory Scientist to join our Quality Control team at our site in Irvine, North Ayrshire (Scotland). This is a great opportunity for a highly motivated person who is keen to progress and develop their career further. The Quality Control department ensures that all aspects of the manufacture of products are performed in a controlled manner and meet commitments to regulatory bodies and the requirements of current Good Manufacturing Practice. The laboratory teams work as part of site value streams alongside the business centres to ensure that products are compliant and fit for purpose. In this role you will complete the required product testing ensuring this is done in a safe and compliant way to ensure the analysis generated accurate data to enable product disposition to be assigned. Day to Day responsibilities will include: Sample, test, report and validate final products, intermediates, raw materials and in-process samples to defined procedures. Consistently operate to Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP) standards to ensure compliant product testing. Maintain and calibrate a wide range of analytical equipment to ensure continual production of accurate and precise results. Utilise theoretical and practical knowledge to aid interpretation of results and troubleshooting. Demonstrate proficiency in routine laboratory information systems to interpret and report results. Work in a compliant manner to ensure the safety of yourself, others and the protection of the environment. Identify, participate and implement Continuous Improvement opportunities, including seeking, recommending and implementing Continuous Improvement opportunities to minimise waste and remove risks from the business. Complete all actions arising from internal and / or external audit commitments. Order reference standards to support lab analysis and monitor stability cabinet and retained sample operations to ensure no detrimental impact on testing and compliance. Interested In applying? Please note this role will be based at our site in Irvine, North Ayrshire (Scotland) working days. During the course of your application you will be requested to complete voluntary information which will be used in monitoring the effectiveness of our equality and diversity policies. Your information will be treated as confidential and will not be used in any part of the selection process. If you require a reasonable adjustment to the application / selection process to enable you to demonstrate your ability to perform the job requirements, please contact 0808 234 4391. This will help us to understand any modifications we may need to make to support you throughout our selection process. Closing date for applications: Close of Business – Friday 5th July 2019. When applying for this role, please use the 'cover letter' of the on-line application to describe how you meet the competencies for this role, as outlined in the job requirements above. The information that you have provided in your cover letter and CV will be used to assess your application. Thank you for your interest in this opportunity. *LI-GSK Why You? Basic qualifications:   You will possess a HND or equivalent level of qualification within an appropriate discipline (Analytical chemistry or equivalent). In addition you will also possess: Technical knowledge and experience of analytical science Demonstrable experience in a laboratory setting Relevant experience of working without close supervision Experience of participation in inter-departmental teams working on quality related problems Ability to trouble shoot problem analytical methods / instrumentation and implement solutions Knowledge of GMP, GLP and Regulatory issues Communication and Influencing Skills High motivation and an ability to operate within a team Preferred qualifications:   The following characteristics / experience would also be highly desirable: Degree in an appropriate scientific discipline Knowledge of Quality Management System (QMS) including GQMP’s and GQP’s Knowledge of data handling laboratory systems Good knowledge of relevant analytical techniques Computer literate, competent in use of Microsoft packages and SAP Has a keen eye for detail and is readily able to identify procedural or GMP errors  Strives to ensure own work is right first time, and supports initiatives and identifies opportunities to reduce analytical errors across the laboratories  Embraces own errors as an opportunity for improvement and shares learnings. Is capable of presenting information clearly to own teams and across quality using various media. Has good written and verbal communication skills. Why GSK? :   GSK is a science-led global healthcare company that researches and develops a broad range of innovative medicines and brands. Our products are used by millions of people around the world, helping them to do more, feel better and live longer. Employing over 100,000 people globally, we have 71 manufacturing sites around the world.  For more information on GSK please refer to our website:  www.gsk.com Contact information:  You may apply for this position online by selecting the Apply now button.  Important notice to Employment businesses/ Agencies GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Provide onshore Laboratory technical support to clients and the fulfilment of account requirements whilst ensuring all HSEQ requirements are met.   Potential future ad hoc offshore responsibilities and career advancement within the company.   Essential Responsibilities:   Onshore chemical sampling, testing and analysis. Chemical quality control testing. Support of technical projects. Coordinate laboratory work scopes, providing technical assistance to support customer accounts Other ad-hoc duties and special projects as assigned. Presenting analysis results to customer account representatives.   Qualifications/Requirements:   Degree qualification in Chemistry or similar science would be beneficial Experience of working in a chemical laboratory would be beneficial Good awareness of HSE and QA standards and practices Awareness of chemical hazards and general health, safety, environment and welfare considerations Knowledge of various chemical testing methods, can be university knowledge or industry methods. Knowledge of HSE and general housekeeping responsibilities within a chemical environment, particularly in relation to the supervision of personnel Knowledge of quality standards required within a chemical environment Skills in the use of Microsoft Office packages, particularly excel and powerpoint   Desired Characteristics:   Communication skills, both verbal and written Analytical and Problem solving skills Report writing skills Skilled in identifying process improvements Ability to work to strict deadlines Skills in the use of Microsoft Office packages, particularly excel Skills in conducting laboratory testing Ability to apply mathematical calculations to support tasks Ability to work on own initiative and as part of a wider team Ability to be flexible Ability to work safely and ensure others work safely